51
4
Taking Pictures
Available in R
In R (Program mode), the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode and recorded pixels.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select R
(Program).
3 Press the 4 button.
The shooting mode is selected and the camera returns to capture
status.
4 Set the functions you want to use.
5 Press the shutter release button
halfway.
The focus frame on the LCD monitor turns
green if the subject is in focus.
6 Press the shutter release button
fully.
The picture is taken.
Letting the Camera Choose the Optimal Settings
(Program Mode)
When the subject is recognized as a person in R mode, Face
Recognition AF&AE is activated. (p.46)
1, 2
3
5, 6
08/01/2007
38
38
14:25
To Next Page
Loading...
Need help?
General
