Pentax Optio E40 - Changing the USB Connection Mode

138
8
Settings
Choose the appropriate USB connection mode depending on whether
you are going to connect the USB/AV cable to a PC or a PictBridge-
compatible printer.
1 Use the four-way controller (23) to select [USB
Connection] on the [H Setting] menu.
2 Press the four-way controller (5).
A pull-down menu appears.
3 Use the four-way controller (23)
to select [PC] or [PictBridge].
[PC] : Select this option when
transferring image data to a
computer
[PictBridge] : Select this option when
connecting the camera to a
PictBridge-compatible printer
4 Press the 4 button.
The USB Connection setting is saved.
Changing the USB Connection Mode
For instructions on connecting the camera to a computer, refer to the
PC Connection Manual contained in the CD-ROM that contains this
Operating Manual.
Do not connect the camera to your PC while [PictBridge] is selected
for the USB Connection mode. And do not connect the camera to
your printer while [PC] is selected.
How to display the [H Setting] menu
MENU
Setting
08/01/2007
Language/
MENU
1/3
Format
Sound
English
Date Adjust
Folder Name
Exit
Date
3 button
4 button
Four-way controller
Setting
USB Connection
Video Out
PC
PictBridge
2/3
MENU
Cancel
Brightness Level
Power Saving 5sec
OK
OK
Auto Power Off
3min