60
4
Taking Pictures
6 Press the 4 button.
After the message “Data being processed” blinks for a while, the
stitched picture is displayed on the LCD monitor.
6 Pan the camera to the right, compose the third picture,
and press the shutter release button.
Be sure to make the “overlay” cover the same position in the third
picture when you compose.
After the message “Data being processed” blinks for a while, the
stitched picture is displayed on the LCD monitor.
When You Take 2 Pictures Only
When You Take 3 Pictures
• Focus, exposure, white balance, drive mode, flash mode, and
zoom ratio are set with those of the first picture.
• You can re-take the first or second picture. During the Instant
Review, press i button, the four-way controller (2), and the
4
button to delete the image, then take a picture again.
When [Instant Review] in [A Rec. Mode] menu is set to Off, no
Instant Review is displayed. (p.84)
To Next Page
Loading...
Need help?
General
