EasyManuals Logo

Pentax Optio E40 User Manual

Pentax Optio E40
169 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
69
4
Taking Pictures
4 Press the 4 button.
The focus is fixed and the camera returns to capture status.
If you wish to adjust focus again, press the four-way controller (5) to
display the \ indicator.
When you have difficulty in auto focusing on a subject, try the
procedures below.
1 Find alternate subject that is in the same distance from
the camera as the desired subject.
2 Focus on the alternate subject.
Locate it in the focus frame on the LCD monitor.
3 Press the shutter release button halfway.
The focus frame turns green when the alternate subject is in focus.
4 While holding the shutter release button halfway, move
the camera to obtain the desired composition.
The focus is locked at the point you set in step 3 even if you
recompose. (Focus lock)
5 Press the shutter release button fully.
Shooting mode and drive mode cannot be changed while adjusting
\.
To switch from \ to another focus mode, press the four-way
controller (5) while the \ indicator is displayed.
Focus lock
You may have difficulty in auto focusing on such subjects as:
Subject contrast is very week. (blue sky, solid white wall, etc.)
Dark places, black object, or subject that does not reflect light.
Subject with strong reflected light, or strong backlight.
Object with a fine pattern
Rapidly moving objects
When a distant object and a close object are both in the focus frame.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pentax Optio E40 and is the answer not in the manual?

Pentax Optio E40 Specifications

General IconGeneral
BrandPentax
ModelOptio E40
CategoryDigital Camera
LanguageEnglish

Related product manuals