26
1
Getting Started
Use of the AC adapter kit K-AC78 (optional) is recommended if you
intend to use the camera for a long time or connect it to a PC.
1 Make sure that the camera is turned off and open the
battery/card cover.
2 Remove the Battery.
Refer to p.24 on how to open/close the battery/card cover and remove
the battery.
3 Insert the DC coupler.
Using the side of the DC coupler to press the battery/card cover lock
lever, insert the DC coupler. Confirm the DC coupler is locked in place.
4 Extract the DC coupler cord.
Pull out the tab at the joint of the camera and the battery/card cover so
that the DC coupler cord extracts from there.
5 Close the battery/card cover.
6 Connect the DC terminal of the AC adapter to the DC
terminal of the DC coupler.
7 Connect the AC plug cord to the AC adapter.
8 Plug the AC plug cord into the power outlet.
Using the AC Adapter
4
AC adapter
AC plug cord
DC terminal
6
3
1
8
7
DC coupler
To Next Page
Loading...
