Pentax Optio M50 - Default Settings

181
9
Appendix
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is
explained below.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera is turned off.
No : The setting returns to the default setting when the camera is turned off.
* : The setting depends on the [Memory] setting (p.106).
Reset Setting
Yes : The setting returns to the default setting with the Reset
function (p.178).
No : The setting is saved even after reset.
[A Rec.Mode] Menu Items
Item Default Setting
Last Memory
Setting
Reset
Setting
Page
Recorded Pixels E (3264×2448) Yes Yes p.91
Quality Level D (Better) Yes Yes p.93
White Balance F (Auto) * Yes p.94
Focusing Area J (Multiple) Yes Yes p.100
AE Metering L (Multi-segment) * Yes p.96
Sensitivity Auto * Yes p.98
EV Compensation ±0.0 * Yes p.84
Movie
Recorded Pixels m (640×480) Yes Yes p.110
Quality Level C (Best) Yes Yes p.111
Frame Rate 30fps Yes Yes p.112
Color Mode Full Color Yes Yes p.113
Movie SR O (On) Yes Yes p.114
Digital
wide
O (On) Yes Yes p.83
Digital Zoom O (On) * Yes p.80
Instant Review 1 sec Yes Yes p.101