Pentax Optio M50 - Page 85

83
4
Taking Pictures
6 Press the 3 button, 4
button, or Zoom/
w / x button.
7 Press the four-way controller (2).
8 Press the 4 button.
S mode stops.
S mode is set to O (On) in the default settings. Use the A mode to set
whether the camera enters S mode when the w side of the Zoom/w/
x button is pressed.
1 Press the 3 button in A mode.
[A Rec.Mode] appears.
2 Press the four-way controller (23) to select [Digital
Wide].
3 Use the four-way controller (45)
to select O (On) or P (Off).
The selected setting is saved.
4 Press the 3 button.
The setting is complete and the camera
returns to capture status.
Setting the Digital Wide Function
OK
OK
OK
OK
Exit
Cancel
Exit the Digital Wide
mode?
Rec.Mode
1sec
Digital Wide
Instant Review
Memory
MENU
2/3
EV Compensation
0.0
Movie
Digital Zoom
Exit