Pentax Optio M50 - Page 60

58
3
Common Operations
1 Select [Green Button] on the [A Rec.Mode] menu.
2 Press the four-way controller (5).
A pull-down menu appears.
3 Use the four-way controller (23)
to choose a function and press the
4 button.
4 Press the 3 button.
The camera returns to capture status with the current setting.
1 Press the Green button in A
mode.
The function assigned to [Green Button] on
the [A Rec.Mode] menu is called up.
2 Use the four-way controller (45)
to change the settings and press
the 4 button.
The camera returns to capture status.
Assigning a Function to the Green Button
Using the Green Button
If a function other than the 9 (Green) mode has been assigned to
the Green button, the camera returns to the original screen if no
operation is performed for 5 seconds after the Green button is
pressed.
Green Button
Q
9Green Mode
MENU
Cancel
OK
OK
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
EV Compensation
EV Compensation
EV Compensation
0.0
0 .0
0.0