80
5
Recording and Playback
Adding Sound (Voice Memo) to Images
You can add sound (voice memo) to a captured image.
1 Enter the Playback mode and use
the four-way controller (45) to
choose the image to which you
want to add a voice memo.
O appears on the four-way controller
operation guide on the LCD monitor if there
is no voice memo attached to the displayed
image.
2 Press the OK button.
Recording of the voice memo starts. You can record for up to 30
seconds.
3 Press the OK button.
Recording of the voice memo stops.
Recording a Voice Memo
You cannot record or play back voice memos when the image is rotated.
2, 3
1
100-0004
To Next Page
Loading...
