21
Getting Started
1
6 When you have finished the settings, press the OK
button when the clock reaches 00 seconds.
The camera is ready to take a picture.
When you set date and time except the initial settings, press the OK
button again after pressing the OK button when the clock reaches 00
seconds to return to capture mode.
• When the initial settings screen is displayed, you can cancel the
settings operation and switch to Capture mode by pressing the
MENU button. If this is done, the initial settings screen will be
displayed next time you turn the camera on.
• You can change the settings after they have been made. Refer to
“Changing the Date/Time” (p.100).
To Next Page
Loading...
