Pentax OPTIO S4 - Taking Pictures; Setting the Functions (Program Mode)

53
4
Taking Pictures
Taking Pictures
In Program mode (A), the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode or continuos shooting mode.
1 Press the four-way controller (3) in Capture Mode.
The virtual mode dial appears.
2 Use the four-way controller (45)
to display the Program mode (
A)
at the top of the dial.
3 Press the OK button.
4 Set the functions you want to use.
Refer to “Setting the Shooting Functions”
(p.36 to p.52) for details of how to set the functions.
5 Press the shutter release button.
The picture is taken.
Setting the Functions (Program Mode)
Taking Still Pictures 1 p.22
4
5
3
1, 2
Ok
OK