22
2
Quick Start
Quick Start
Taking Still Pictures
For the simplest procedure to take still pictures:
The flash fires automatically depending on the light conditions.
1 Press the power switch.
The camera will turn on.
2 Confirm the subject and shooting
information on the LCD monitor.
The focus frame in the middle of the LCD
monitor indicates the zone of automatic
focusing. You can change the size of the
subject by pressing the Zoom button.
x: makes the subject bigger.
w: makes the subject smaller.
You can check the size of the subject by looking through the
viewfinder.
As there is no focus frame in the viewfinder, be sure to check the
focusing area on the LCD monitor.
Shutter release button
Zoom f/y button
Power switch
LCD monitor
Viewfinder
Display button
200
200
11:19
11:19
10/20/2003
10/20/2003
Focus frame
To Next Page
Loading...
