144
6
Playback/Deleting/Editing
You can correct images where the flash has caused the subject to
appear with red eyes.
1 Enter the Playback mode and press the four-way
controller (45) to choose the image you want to
correct.
2 Press the four-way controller (3).
The Mode Palette appears.
3 Use the four-way controller
(2345) to select Z
(Red-eye Compensation).
4 Press the OK button.
A confirmation dialog for overwriting the
image appears.
5 Use the four-way controller (23) to select [Overwrite]
or [Save as].
When the image is protected, [Save as] will be selected automatically.
6 Press the OK button.
The edited image is saved with the same number of recorded pixels
and quality level as the original.
Red-eye Compensation
• The red-eye compensation function cannot be used on movies or
on images where red eyes cannot be detected by the camera. An
error message appears in Step 4.
• The red-eye compensation function can only be used with still
pictures taken with this camera.
Four-way controller
OK button
Red-eye Compensation
OKMENU
OK
To Next Page
Loading...
