Pentax Optio S6 - Setting the Exposure (EV Compensation)

89
Taking Pictures
4
You can adjust the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed or
underexposed.
1 Press the MENU button in Capture mode.
The [A Rec.Mode] menu appears.
2 Use the four-way controller (23)
to select [EV Compensation].
3 Use the four-way controller (45)
to change the EV setting.
To brighten, set a positive (+) value. To
darken, set a negative (–) value.
You can choose the EV setting in the range
of –2.0 EV to +2.0 EV in 1/3 EV steps.
4 Press the shutter release button halfway.
The camera is ready to take the picture.
Setting the Exposure (EV Compensation)
Saving the EV Compensation Value 1p.100
Rec. Mode
MENU
Exit
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
AWB
Auto
6M
MENU
Shutter release
button
MENU button
Four-way
controller
Rec. Mode
Green Button
MENU
Exit
EV Compensation
Movie
Digital Zoom
Instant Review
Memory
1sec1sec
±0.0