Pentax Optio S6 - Taking Panorama Pictures (Panorama Assist Mode)

61
Taking Pictures
4
You can take a number of images and join them together to form a
panorama picture. The software supplied with the camera (ACDSee for
PENTAX) and a computer are necessary for joining the images. The
Panorama Assist mode enables you to overlap the edges of the images
so that they are easier to join together later into a panorama picture.
1 Press the four-way controller (3) in Capture mode.
The Mode Palette appears.
2 Use the four-way controller
(2345) to select
F (Panorama
Assist mode).
3 Press the OK button.
4 Use the four-way controller to
choose the direction in which the
images will be joined.
4 Joins the images at the left.
5 Joins the images at the right.
2 Joins the images at the top.
3 Joins the images at the bottom.
The example shows the images when
5 is selected.
Taking Panorama Pictures
(Panorama Assist Mode)
Shutter release button
Four-way controller
OK button
Panorama Assist
OKMENU
OK
Set shift direction
Set shift direction
Set shift direction