62
Taking Pictures
4
5 Take the first image.
Press the shutter release button to take the
first image. The right edge of the image
appears in half-transparent form on the left
of the LCD monitor.
6 Move the camera to the right and
take the second image.
Move the camera until the half-transparent
image and the actual view overlap and
press the shutter release button. Repeat
Steps 5 and 6 to take the third and
subsequent images.
To cancel Panorama Assist mode, change to another mode.
• The camera cannot join the images. Use the panorama software
supplied with the camera (ACDSee for PENTAX, ACD
photostitcher). Refer to “ACDSee for PENTAX Users Guide” for
instructions on creating panorama pictures.
• Continuous shooting is not possible in Panorama Assist mode.
11
To Next Page
Loading...
