83
Taking Pictures
4
3 Press the four-way controller (5).
The White Balance screen appears.
4 Use the four-way controller
(2345) to change the setting.
5 Press the shutter release button
halfway.
The camera is ready to take the picture.
Place a white material such as a piece of white paper in front of your
camera to adjust white balance.
1 Select [K] (Manual) on the White
Balance screen.
2 Point the camera at the white
material so that it fills the screen.
3 Press the Green button.
The white balance is automatically
adjusted. [Complete] appears on the LCD monitor.
4 Press the OK button.
The setting now adjusted is saved and the screen returns to the
[A Rec.Mode] menu.
5 Press the shutter release button halfway.
The camera is ready to take the picture.
Saving the White Balance 1p.100
Manual Setting
White Balance
AWB
To Next Page
Loading...
