EasyManuals Logo

Pentax R07020 Start Guide

Pentax R07020
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
37
4
Press the shutter release button to take a picture.
The countdown starts and the remaining seconds are displayed on the screen.
If you select g
The self-timer lamp and all of the LED Macro Lights turn on.
From 5 seconds before shooting, the LED Macro Lights turn off in order from
the top right.
From 3 seconds before shooting, the self-timer lamp blinks.
If you select Z
The self-timer lamp and the LED Macro Lights blink.
The picture is taken after a countdown of either ten seconds or two seconds.
Focusing may be compromised if you move the camera while the self-timer
lamp is blinking when taking still pictures.
•In C (Movie), (Underwater Movie), and (High Speed Movie)
modes, recording will start after ten seconds or two seconds.
Press the shutter release button halfway while the self-timer is engaged to
stop the countdown and press fully to restart the countdown.
Z cannot be selected while the 9 (Green) mode settings remain at
default. Select Z in another shooting mode and then switch the shooting
mode to 9.
The self-timer lamp and LED Macro Lights do not turn on or blink in e (Pet)
mode.
In the following situations, the LED Macro Lights remain turned on
regardless of the countdown.
-In (Digital Microscope) mode
- When [Macro Light] in the [A Rec. Mode] menu is set to O (On)
g/Z cannot be selected in some shooting modes.
e_kb615_StartGuide.fm Page 37 Tuesday, October 17, 2023 9:26 AM

Other manuals for Pentax R07020

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pentax R07020 and is the answer not in the manual?

Pentax R07020 Specifications

General IconGeneral
BrandPentax
ModelR07020
CategoryDigital Camera
LanguageEnglish

Related product manuals