EasyManua.ls Logo

Pentax WG-8 - Page 50

Pentax WG-8
139 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
48
Shooting
Caution -------------------------------------------------------------------------------------------------------
The image quality in the UVC mode is fixed to [FullHD 30fps].
During the UVC mode, nothing is displayed on the camera monitor.
During the UVC mode, the microphone of the camera cannot be used.
When mounting the camera on a tripod or similar device, use the optional Extension Adapter TE-2.
Memo ---------------------------------------------------------------------------------------------------------
For the software settings, refer to the help, etc. of each software.
You can change the angle of view by operating 4 (T)/5 (W) during the UVC mode.
Even in the UVC mode, autofocus operates within the normal range (10 cm to
Z). If you want auto-
focus to operate at a closer distance, press s (b) to switch to [1cm Macro].
The UVC mode is retained even when the camera is turned off. To cancel the UVC mode, remove the
USB cable and set [USB Connection] to a mode other than [UVC] in the E menu.
Using the Ring Light Together ---------------------------------------------------------------------------
When the mode dial is set to P during the UVC mode, the ring light turns on. To turn off the ring
light, set the mode dial to a mode other than P.
The brightness and lighting position of the ring light can be changed in [Ring Light] of the A menu.
During the UVC mode, the ring light remains on regardless of the [LightningTime] setting.
When the ring light is used, the continuous usage time of the webcam function is limited.
The estimated continuous usage time when the battery is fully charged is as follows.
[Ring Light] Setting Continuous Usage Time
Off Approx. 360 minutes
Brightness [1] Approx. 200 minutes
Brightness [5] Approx. 45 minutes
Brightness [9] Approx. 20 minutes
The continuous usage time varies depending on the room temperature, etc.
If the ring light is turned on for a long period of time, the camera becomes hot and is forced to be
turned off. In this case, handle the camera carefully. The camera is unavailable for use for a while
until it cools down.

Table of Contents

Related product manuals