Pentax WG-8 - Setting the White Balance Manually

3
57
Shooting
Tungsten
Used with incandescent lighting.
Ring Light
Used when the ring light of the camera is used.
Manual WB
Set the white balance manually. (p.57)
3 Press e.
4 Press f.
The shooting screen reappears.
Caution -------------------------------------------------------------------------------------------------------
• The white balance may not be adjusted correctly for a subject that is mostly dark.
Setting the White Balance Manually
1 Select [Manual WB] in Step 2 on p.56.
2 Aim the camera at a white subject, such as a sheet of paper,
under the light for shooting.
3 Press the green button.
An image to be used for white balance ad-
justment is taken.
4 Press e.
5 Press f.
The shooting screen reappears.
White Balance
White Balance
Manual WB
Manual
WB
Cancel
Cancel
OK