5
Changing the Settings
96
File Name
The string of characters “IMGP” is used as the file name prefix by default.
You can change this to any string of characters.
1 Select [File name] in the E menu, and press d.
2 Select [Custom], and press d.
3 Select a character to enter.
Uppercase alphanumeric characters and “_” can be entered.
㹕 E R T Y U I O PQ
S D F G H J K LA
Z
123
X C V B N M
IMGP
_
Cancel Finish
Text entry cursor
Delete one character
End entry
Switch character type
abcd Moves the text selection cursor (yellow frame).
e Enters a character selected with the text selection cursor.
4 After entering the text, move the text selection cursor to 1,
and press e.
File Sequence No.
In [File Sequence No.] of the E menu, you can set whether to continue the
sequential numbering for file names even when memory cards are replaced.
On Continues the sequential numbering for file names even after memory cards are replaced.
Off Resets the numbering for file names after memory cards are replaced.
To Next Page
Loading...
