15.2 Bandwidth Control
This section is to define how much minimum bandwidth will be reserved to each user group
when a WAN connection is in full load. When this feature is enabled, a slider with two
indicators will be shown. You can move the indicators to adjust each group's weighting. The
lower part of the table shows the corresponding reserved download and uploads bandwidth
value of each connection.
By default, 50% of bandwidth has been reserved for Manager, 30% for Staff, and 20% for
Guest.
You can define a maximum download speed (over all WAN connections) and upload speed (for
each WAN connection) that each individual Staff and Guest member can consume. No limit can
be imposed on individual Managers. By default, download and upload bandwidth limits are set
to unlimited (set as 0).
15.3 Application Queue
This section is to define the QoS Application Queue. You can set guaranteed bandwidth for a
queue and assign it to applications.
Click the Add button to create the QoS Application Queue.
To Next Page
Loading...
Need help?
General
