This setting specifies a name for the QoS Application Queue.
Bandwidth to be reserved (for each WAN connection) for this queue. When WAN is
congested, this bandwidth will remain available for applications assigned to this queue.
Enable this option if you want this queue to utilize WAN's unused bandwidth.
15.4 Application
15.4.1 Application Prioritization
On many Pepwave routers, you can choose whether to apply the same prioritization settings to
all user groups or customize the settings for each group.
Three application priority levels can be set: ↑High,━ Normal, and↓Low. Pepwave routers
can detect various application traffic types by inspecting the packet content. Select an
application by choosing a supported application, or by defining a custom application
manually. The priority preference of supported applications is placed at the top of the
table. Custom applications are at the bottom.
To Next Page
Loading...
