This setting specifies the SSID of the virtual AP to be scanned by Wi-Fi
clients.
Click the drop-down menu to apply a time schedule to this interface
This setting specifies the VLAN ID to be tagged on all outgoing packets
generated from this wireless network (i.e., packets that travel from the Wi-Fi
segment through the Pepwave AP One unit to the Ethernet segment via the
LAN port). The default value of this setting is 0, which means VLAN tagging
is disabled (instead of tagged with zero).
This setting specifies whether or not Wi-Fi clients can scan the SSID of this
wireless network. Broadcast SSID is enabled by default.
Select Auto to allow the Pepwave router to set the data rate automatically,
or select Fixed and choose a rate from the displayed drop-down menu.
This setting enables the filtering of multicast network traffic to the wireless
SSID.
To Next Page
Loading...
Need help?
General
