peplink B One Series - Page 191

Session Logging
This setting is to enable event logging at the specified log server.
Session Logging
Host
This setting specifies the IP address or hostname of the Session log server.
For more information on the Router Utility, go to:
www.peplink.com/products/router-utility
23.7 SNMP
SNMP or simple network management protocol is an open standard that can be used to collect
information about the Pepwave router. SNMP configuration is located at System > SNMP.
SNMP Settings
SNMP Device
This field shows the router name defined at System > Admin Security.
https://www.peplink.com
191
Copyright @ 2024 Peplink