peplink B One Series User Manual

24.4 WAN Analysis
The WAN Analysis feature allows you to run a WAN to WAN speed test between 2 Peplink
devices .
You can set a device up as a Server or a Client. One device must be set up as a server to run
the speed tests and the server must have a public IP address.
The default port is 6000 and can be changed if required. The IP address of the WAN interface
will be shown in the WAN Connection Status section.
https://www.peplink.com
199
Copyright @ 2024 Peplink

peplink B One Series Specifications

General

Brand	peplink
Model	B One Series
Category	Network Router
Language	English