Layer 2 SpeedFusion VPN Bridging
SpeedFusion
VPN Profiles to
Bridge
The remote network of the selected SpeedFusion VPN profiles will be bridged with
this local LAN, creating a Layer 2 SpeedFusion VPN, they will be connected and
operate like a single LAN, and any broadcast or multicast packets will be sent over
the VPN.
Click the box will enable STP for this layer 2 profile bridge.
Click on the question Mark if you want to enable DHCP Option 82.
This allows the device to inject Option 82 with Router Name information before
forwarding the DHCP Request packet to a SpeedFusion VPN peer, such that the
DHCP Server can identify where the request originates from.
Override IP
Address when
bridge
connected
Select "Do not override" if the LAN IP address and local DHCP server should
remain unchanged after the Layer 2 SpeedFusion VPN is up.
If you choose to override the IP address when the VPN is connected, the device
will not act as a router, and most Layer 3 routing functions will cease to work.
To Next Page
Loading...
