In case of a network address conflict with remote peers (i.e. SpeedFusion VPN / IPsec VPN / IP
Forwarding WAN are considered as remote connections), you can define Virtual Network
Mapping to resolve it.
Note: OSPF & RIPv2 settings should be updated as well to avoid advertising conflicted networks.
For further details on virtual network mapping watch this video:
https://youtu.be/C1FMdZCn3Z8
Every IP Address in the Local Network has a corresponding unique Virtual IP
Address for NAT.
Traffic originating from the Local Network to remote connections will be SNAT'ed
and behave like coming from the defined Virtual Network.
While traffic initiated by remote peers to the Virtual Network will be DNAT'ed
accordingly.
The subnet range defined in Local Network will be mapped to a single Virtual IP
Address for NAT. Traffic can only be initiated from local to remote, and these
traffic will be NAT'ed and behaves like coming from the same Virtual IP Address.
To Next Page
Loading...
Need help?
General
