Indicate a name you wish to give this Cellular WAN connection
Click the checkbox to toggle the on and off state of this connection.
This option allows you to configure the WAN connection whether for normal daily
usage or as a backup connection only.
If Always-on is chosen, the WAN connection will be kept on continuously, regardless
of the priority of other WAN connections.
If Backup is chosen, the WAN connection will depend on other WAN connections. It
will not be used when one or more higher priority dependent WAN connections are
connected.
Independent
from Backup
WANs
If this is checked, the connection will be working independent from other Backup WAN
connections. Those in Backup Priority will ignore the status of this WAN connection,
and will be used when none of the other higher priority connections are available.
This option allows you to select the routing method to be used in routing IP frames via
the WAN connection. The mode can be either NAT (Network Address Translation) or
IP Forwarding.
In the case if you need to choose IP Forwarding for your scenario. Click the
To Next Page
Loading...
Need help?
General
