USER MANUAL
Peplink Balance Series
http://www.peplink.com -110 / 261 - Copyright © 2015 Peplink
12.5 Dynamic DNS Settings
The Peplink Balance allows registering domain name relationships to dynamic DNS
service providers. Through registration with dynamic DNS service provider(s), the
default public Internet IP address of each WAN connection can be associated with a
hostname. With dynamic DNS service enabled for a WAN connection, you can connect
to your WAN's IP address externally even if its IP address is dynamic. You must register
for an account from the listed dynamic DNS service providers before enabling this
option.
If the WAN connection's IP address is a reserved private IP address (i.e., behind a NAT
router), the public IP of each WAN will be automatically reported to the DNS service
provider.
Either upon a change in IP addresses or every 23 days without link reconnection, the
Peplink Balance will connect to the dynamic DNS service provider to update the
provider’s IP address records.
The settings for dynamic DNS service provider(s) and the association of hostname(s)
are configured via Network>Interfaces>WAN>*Connection name*>Dynamic DNS
Settings.
If your desired provider is not listed, you may check with DNS-O-Matic. This service
supports updating 30 other dynamic DNS service providers. (Note: Peplink is not
affiliated with DNS-O-Matic.)
To Next Page
Loading...
