peplink Balance 380 - Snmp

USER MANUAL
Peplink Balance Series
http://www.peplink.com -214 / 261 - Copyright © 2015 Peplink
24.6 SNMP
SNMP or simple network management protocol is an open standard that can be used to
collect information about the Peplink Balance unit. SNMP configuration is located at
System>SNMP.
SNMP Settings
SNMP Device
Name
This field shows the router name defined at System>Admin Security.
SNMP Port
This option specifies the port which SNMP will use. The default port is 161.
SNMPv1
This option allows you to enable SNMP version 1.
SNMPv2
This option allows you to enable SNMP version 2.
SNMPv3
This option allows you to enable SNMP version 3.