USER MANUAL
Peplink Balance Series
http://www.peplink.com -176 / 261 - Copyright © 2015 Peplink
20.1.3 Web Blocking
20.1.3.1 Web Blocking
Enter an appropriate website address, and the Peplink Balance will block and disallow
LAN/PPTP/SpeedFusion
TM
peer clients to access these websites. Exceptions can be
added using the instructions in Sections 20.1.3.2 and 20.1.3.3.
You may enter the wild card ".*" at the end of a domain name to block any web site with
a host name having the domain name in the middle. For example, If you enter
"foobar.*," then "www.foobar.com," "www.foobar.co.jp," or "foobar.co.uk" will be
blocked. Placing the wild card in any other position is not supported.
The Peplink Balance will inspect and look for blocked domain names on all HTTP
traffic. Secure web (HTTPS) traffic is not supported.
20.1.3.2 Exempted User Groups
Check and select pre-defined user group(s) who can be exempted from the access
blocking rules. User groups can be defined at QoS>User Groups section. Please refer
to Section 19.1 for details.
20.1.3.3 Exempted Subnets
With the subnet defined in the field, clients on the particular subnet(s) can be exempted
from the access blocking rules.
To Next Page
Loading...
