peplink Pepwave MAX Series

15.3 SpeedFusion
TM
Status
SpeedFusionTM status is shown in the Dashboard. The connection status of each connection
profile is shown as below.
After clicking the Status button at the top right corner of the SpeedFusion
TM
table, you will be
forwarded to Status>SpeedFusion
TM
, where you can view subnet and WAN connection
information for each VPN peer. Please refer to Section 22.6 for details.
IP Subnets Must Be Unique Among VPN Peers
The entire interconnected SpeedFusion
TM
network is a single non-NAT IP network. Avoid duplicating
subnets in your sites to prevent connectivity problems when accessing those subnets.
https://www.peplink.com
172
Copyright @ 2021 Peplink