EasyManua.ls Logo

peplink Pepwave AP One Series

peplink Pepwave AP One Series
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Pepwave AP One Series:
AP One AC Mini (HW2) / AP One Flex (HW4) / AP One AX
Pepwave AP One Firmware 3.7.3 / 3.8.1
January 2021
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of
Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners
Question and Answer IconNeed help?

Do you have a question about the peplink Pepwave AP One Series and is the answer not in the manual?

peplink Pepwave AP One Series Specifications

General IconGeneral
Brandpeplink
ModelPepwave AP One Series
CategoryWireless Access Point
LanguageEnglish

Summary

Hardware Overview

Installation

Installation Procedures

Step-by-step guide on connecting and powering up the access point.

Dashboard

Network

WAN

Configuration for WAN connection details to connect to the Internet.

LAN

Configuration of LAN interface settings, including IP and DHCP settings.

PepVPN

Securely connect remote sites to the access point using PepVPN.

Inbound Access

Define port forwarding rules to allow inbound access from the Internet.

NAT Mapping

Configure IP address mapping for inbound and outbound NAT'd traffic.

AP Tab

AP

Controls for wireless SSID, AP settings, Mesh, and WDS.

System Tab

Admin Security

Configure user access, passwords, and network access settings.

Operating Mode

Select the device's operating mode: Router, Bridge, or Bridge without LAN.

Firmware

Process for upgrading the access point's firmware online or manually.

Status Tab

Device

Displays system information, model, firmware, uptime, and MAC address.

Restoring Factory Defaults