peplink Pepwave AP One Series

9.7 Event Log
Event log functionality enables event logging at a specified remote syslog server. The settings
for configuring the remote system log can be found at System > Event Log.
9.8 SNMP
SNMP or simple network management protocol is an open standard that can be used to collect
information about the Pepwave AP unit. SNMP configuration is located at System > SNMP.
Remote Syslog Settings
Remote Syslog
This setting specifies whether or not to log events at the specified remote syslog server.
Remote Syslog
Host
This setting specifies the IP address or hostname of the remote syslog server.
Default Port is: 514
Push Event
The Pepwave AP can also send push notifications to mobile devices that have our Mobile
Router Utility installed. Check the box to activate this feature.
For more information on the Router Utility, go to: www.peplink.com/products/router-utility
https://www.peplink.com
75
Copyright @ 2020 Pepwave