peplink Pepwave AP One Series

To Next Page

To Previous Page

To add a community for either SNMPv1 or SNMPv2c, click the Add SNMP Community button

in the Community Name table, upon which the following screen is displayed:

SNMP Settings

SNMP Device

Name

This field displays the router name defined at System > Admin Security.

SNMP Port

This option specifies the port which SNMP will use. The default port is 161.

SNMPv1

This option allows you to enable SNMP version 1.

SNMPv2c

This option allows you to enable SNMP version 2c.

SNMPv3

This option allows you to enable SNMP version 3.

SNMP Trap

This option allows you to enable SNMP Trap.

https://www.peplink.com