peplink Pepwave AP One Series

To define a user name for SNMPv3, click Add SNMP User in the SNMPv3 User Name table,
upon which the following screen is displayed:
SNMP Community Settings
Community
Name
This setting specifies the SNMP community name.
Allowed
Network
This setting specifies a subnet from which access to the SNMP server is allowed. Enter the
subnet address here (e.g. 192.168.1.0  ) and select the appropriate subnet mask.
SNMPv3 User Settings
User Name
This setting specifies a user name to be used in SNMPv3.
Authentication
Protocol
This setting specifies via a drop-down menu one of the following valid authentication
protocols:
● None
● MD5
● SHA
When MD5 or SHA is selected, an entry field will appear for the password.
Privacy
This setting specifies via a drop-down menu one of the following valid privacy
protocols:
● NONE
● DES
● AES
https://www.peplink.com
77
Copyright @ 2020 Pepwave