9.4 Time
The time server functionality enables the system clock of the access point to be synchronized
with a specified time server. The settings for time server configuration are located at System >
Time.
9.5 Schedule
Enable and disable different functions such as WAN connections and SSID at different times,
based on a user-scheduled configuration profile. The settings for this are located at System >
Schedule.
Click on New Schedule to begin the schedule profile.
This specifies the time zone (along with the corresponding Daylight Savings Time scheme)
in which Pepwave AP operates. The Time Zone value affects the time stamps in the event
log of the Pepwave AP and e-mail notifications. Check Show all to show all time zone
options.
To Next Page
Loading...