9.13 Reboot
Restart the access point with the Reboot button. For maximum reliability, the Pepwave access
point can contain two copies of firmware; each copy can be a different version. You can select
the firmware version you would like to reboot the device with. The firmware marked with
(Running) is the current system boot up firmware.
Please note that a firmware upgrade will always replace the inactive firmware partition.
9.14 Tools
9.14.1 PING
The ping test tool tests connectivity by pinging the specified destination IP address. The ping
utility is located at System > Tools > Ping.
To Next Page
Loading...
Need help?
General