peplink Surf User Manual

PePLink Surf
User’s Manual
Document Version : 2.6
Firmware Version : 6.0.4
Date : 2006-02-10

peplink Surf Specifications

General

Brand	peplink
Model	Surf
Category	Wireless Router
Language	English

Summary

3 Product Description

3.2 Hardware Setup

Details the physical connection steps for the PePLink Surf device.

4 Using the PePLink Surf

4.1 First Time Setup

Guides users through the initial setup process for connecting to an access point.

4.2 Settings Details

LAN Interface and DHCP Server

Configure LAN IP settings and the built-in DHCP server for network management.

Wireless Network Settings

Configure SSID, Radio Mode, Bit Rate, and Authentication for wireless connections.

4.2 Settings Details (Continued)

Advanced Wireless Configuration

System Management and Reset Options

4.3 Advanced Settings: Port Forward

4.4 WPA/WPA2 with 802.1x Authentication

4.4.1 Configure the PePLink Surf

Steps to enable 802.1x authentication by configuring the PePLink Surf settings.

4.4 WPA/WPA2 with 802.1x Authentication (Continued)

4.4.2 Access Point Configuration

Necessary parameters to configure in the access point for 802.1x authentication.

4.4.3 Radius Server Setup

4.5 Test the Setup

4.6 Firmware Upgrade

4.7 Debug Page

4.8 Restore to Factory Defaults

4.9 System Settings

4.9.1 Web via WAN with HTTPS

4.9.2 Web Administration Password

4.9.3 EAP Types

4.9 System Settings (Continued)

4.9.4 SNMP Settings

4.9.5 Admin Network Settings

4.9.7 Wireless Settings

4.9.6 PePLink Management System settings