PePLink Surf User’s Manual v2.6
Copyright © 1999-2006 PePLink Ltd. All Rights Reserved Page 7 of 30
4 Using the PePLink Surf
You should set up your computer’s LAN interface to obtain an IP address
automatically. If you do so, you should have set it up correctly.
In order to do so, select the “Start” menu, “Control Panel” and then
“Network Connections”. Right click on the “Local Area Connection” icon,
choose “Properties”, double click on the item “Internet Protocol (TCP/IP)”
from the list. On the screen, just set it as follows:
Click the “OK” button to confirm the change.
To Next Page
Loading...
