PePLink Surf User’s Manual v2.6
Copyright © 1999-2006 PePLink Ltd. All Rights Reserved Page 4 of 30
3 Product Description
PePLink Surf, formerly known as MANGA Surf, is a Wi-Fi Station Mode (Client)
Router with WPA, WPA2 and 802.1x supplicant support. It is designed to
act as a Wireless router which connects to Wireless Broadband Internet
Service and allows LAN users to access the Internet via it.
It associates to a service provider and authenticates using 802.1x (if needed)
on start up. Upon successful association and authentication, it will acquire
an IP address from the service provider using DHCP. A DHCP server is
built-in on its LAN port. Network Address Translation is performed for all
outbound connections. Thus it supports multiple terminals to access the
Internet simultaneously.
3.1 Features
• 10/100 Ethernet interface with auto-crossover detection
• Reset button for restoring settings to factory defaults
• Signal strength LED for showing the current signal strength
• WPA/WPA2-Personal and WPA/WPA2-Enterprise support
• Network Address Translation
(NAT) routing
• Built-in DHCP server
• Inbound port range forwarding
To Next Page
