peplink Pepwave MAX Series User Manual

Administration IP must be under the same network.
LAN
Administration
IP
This setting specifies a LAN IP address to be used for accessing administration
functionality. This address should be unique within the LAN.
Subnet Mask
This setting specifies the subnet mask of the LAN.
Important Note
For Pepwave routers in NAT mode, the virtual IP (VIP) should be set as the default gateway for all
hosts on the LAN segment. For example, a firewall sitting behind the Pepwave router should set its
default gateway as the virtual IP instead of the IP of the master router.
In drop-in mode, no other configuration needs to be set.
https://www.peplink.com
220
Copyright @ 2021 Peplink

peplink Pepwave MAX Series Specifications

General

Brand	peplink
Model	Pepwave MAX Series
Category	Wireless Router
Language	English