peplink Pepwave MAX Series User Manual

IPsec NAT-T
This field is for enabling the support of IPsec NAT-T passthrough. UDP ports
500, 4500, and 10000 are monitored by default. You may add more custom
data ports that your IPsec system uses by checking Define custom ports . If
the VPN contains IPsec site-to-site VPN traffic, check Route IPsec Site-to-Site
VPN and choose the WAN connection to route the traffic to.
https://www.peplink.com
226
Copyright @ 2021 Peplink

peplink Pepwave MAX Series Specifications

General

Brand	peplink
Model	Pepwave MAX Series
Category	Wireless Router
Language	English