peplink Pepwave MAX Series User Manual

● None
● STARTTLS
● SSL/TLS
SMTP Port
This field is for specifying the SMTP port number. By default, this is set to 25 . If
Connection Security is selected “ STARTTLS ”, the default port number will be set
to 587 . If Connection Security is selected “ SSL/TLS ”, the default port number will
be set to 465 .
You may customize the port number by editing this field.
SMTP User
Name /
Password
This setting specifies the SMTP username and password while sending email.
These options are shown only if Require authentication is checked in the SMTP
Server setting.
Confirm SMTP
Password
This field allows you to verify and confirm the new administrator password.
Sender’s Email
Address
This setting specifies the email address the Pepwave router will use to send
reports.
Recipient’s Email
Address
This setting specifies the email address(es) to which the Pepwave router will send
email notifications. For multiple recipients, separate each email addresses using
the enter key.
After you have finished setting up email notifications, you can click the Test Email Notification
button to test the settings before saving. After Test Email Notification is clicked, you will see
this screen to confirm the settings:
Click Send Test Notification to confirm. In a few seconds, you will see a message with detailed
test results.
https://www.peplink.com
270
Copyright @ 2021 Peplink

peplink Pepwave MAX Series Specifications

General

Brand	peplink
Model	Pepwave MAX Series
Category	Wireless Router
Language	English