EasyManua.ls Logo

peplink Pepwave MAX Series

peplink Pepwave MAX Series
424 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SNMPv1
This option allows you to enable SNMP version 1.
SNMPv2
This option allows you to enable SNMP version 2.
SNMPv3
This option allows you to enable SNMP version 3.
SNMP Trap
This option allows you to enable SNMP Trap. If enabled, the following entry fields
will appear.
SNMP Trap
Community
This setting specifies the SNMP Trap community name.
SNMP Trap
Server
Enter the IP address of the SNMP Trap server.
SNMP Trap Port
This option specifies the port which the SNMP Trap server will use. The default
port is 162 .
SNMP Trap
Server Heartbeat
This option allows you to enable and configure the heartbeat interval for the SNMP
Trap server.
To add a community for either SNMPv1 or SNMPv2, click the Add SNMP Community button in
the Community Name table, upon which the following screen is displayed:
SNMP Community Settings
Community
Name
This setting specifies the SNMP community name.
https://www.peplink.com
274
Copyright @ 2021 Peplink

Table of Contents

Related product manuals