peplink Pepwave MAX Series

Note: For proper Wi-Fi performance and operations, please ensure all 4 Wi-Fi antenna
connectors (labeled Wi-Fi 1 and Wi-Fi 2) have antennas attached.
2.18.2 LED Indicators
The statuses indicated by the front panel LEDs are as follows:
Status Indicators
Status
OFF
System initializing
Red
Booting up or busy
Blinking red
Boot up error
Green
Ready
Wi-Fi AP and Wi-Fi WAN Indicators
Wi-Fi WAN /
Cellular 1 /
Cellular 2
OFF
Disabled Intermittent
Blinking slowly
Connecting to network(s)
Blinking
Connected to network(s) with traffic
ON
Connected to network(s) without traffic
LAN and Ethernet WAN Ports
Green LED
ON
10 / 100 / 1000 Mbps
Orange LED
Blinking
Data is transferring
OFF
No data is being transferred or port is not connected
https://www.peplink.com
42
Copyright @ 2021 Peplink