Pepperl+Fuchs BTC12N Series - Page 26

2020-05
26
BTC12N-*
Installation
Port Overview
Num-
ber Interface type Description
Front
Antenna opening x 2
(dummy plug)
Dummy plug antenna connections, one on the left and
one on the right
USB
1
1. Only four of these USB ports can be operated simultaneously in high-current mode, max. 14 W.
USB 2.0 x 2
Audio
Line output x 1
2
2. This port is not to be used in a hazardous location
Symbol On/off switch
Back
Ground connection Not required for standard installations
Power plug 5.5 x 2.5 mm DC jack bush with locking mechanism
(M8 screw)
16 VDC to 28 VDC
Polarity
USB
1<Default ¬¹ Font>
USB 3.1 (Super Speed) x 2
COM RS-232/RS-485 port with DB-9 connector x 1
Ethernet 2
(Secondary port)
1000BaseT
RJ45 plug
Ethernet 1
(Primary port)
DisplayPort™ 2 DP 1.2 up to 2 x 4K (Ultra-HD) at 60 Hz
(Up to 3 Full HD monitors via series connection)
DisplayPort™ 1
1
2
3
4
5
6
7
8
9
10
11
12