BTC12N-*
BIOS Settings
2020-05
41
Discarding Changes and Exiting the System
Use the following instructions to exit the system without saving the changes.
1.
Using the arrow keys, select Discard Changes and "Exit." Press ENTER.
2.
Select Yes. Press ENTER to discard the changes and exit the system.
3.
Select No to exit the process.
4.6 Resetting the BIOS to Factory Settings
Restoring Default Settings
You can restore the system using the following instructions.
1.
Use the arrow keys to select Restore Defaults. Press ENTER.
2.
Select Yes. Press ENTER to load the optimized default settings.
3.
Select No to exit the process.
Restoring the Factory Settings with F9
1.
Press F9: Optimized Defaults. Press ENTER.
2.
Select Yes. Press ENTER to load the optimized default settings.
3.
Select No to exit the process.
To Next Page
Loading...