Pepperl+Fuchs BTC12N Series - Page 29

BTC12N-*
Installation
2020-05
29
USB Ports
Figure 3.19 USB 2.0
Figure 3.20 USB 3.0
Pin Type Description
Input/out-
put
1 ML_Lane0+ DP Data 0+ Output
2 GND Ground -
3 ML_Lane0- DP Data 0- Output
4 ML_Lane1+ DP Data 1+ Output
5 GND Ground -
6 ML_Lane1- DP Data 1- Output
7 ML_Lane2+ DP Data 2+ Output
8 GND Ground -
9 ML_Lane2- DP Data 2- Output
10 ML_Lane3+ DP Data 3+ Output
11 GND Ground -
12 ML_Lane3- DP Data 3- Output
13 CONFIG1
CAD
Cable-adapter detection Input
14 CONFIG2 Ground (pull down) -
15 AUX_CH+ Auxiliary channel+ Input/output
16 GND Ground -
17 AUX_CH- Auxiliary channel- Input/output
18 HPD Hot Plug Detect Input
19 GND Ground -
20 DP_PWR +3.3 V (fused) Output
Pin Type Description
1 USB_P5V_-
fused (A)
+5 V (fused)
2 USB_D0M
(I/O)
Data-
3 USB_D0P
(I/O)
Data+
4 USB_GND GND
1 2 3 4
1 2 3 4
9 8 7 6 5